What problems should be paid attention to in storage of injection drum

Three points should be paid attention to in the storage of the plastic injection barrel in order to keep the barrel longer, the barrel body is not damaged and kept intact, especially for the storage requirements of the plastic injection barrel loaded with goods.
Injection barrel should be sheltered and stored to avoid exposure to sunlight. Storage temperature should be below 40 and above - 18 C.
The barrel stacked on the tray of injection moulding barrel is packed and fixed with winding film. When packing, the squeezing deformation between the barrel and the barrel should be avoided. After packing, the number of stacking layers of the tray should be no more than two layers. When stacking, the upper and lower layers should be in line, so that the weight of the upper layers can be uniformly applied to the lower layers. The ground should be level and horizontal.
The drums packed with goods are stacked with double-sided flat pallets, the size of pallets is not more than 1.3 meters. Each tray is stacked on a layer. The number of buckets is determined by the size of the tray. The edge of the bucket should not exceed the edge of the tray. The barrels on the pallet should be stacked symmetrically so that the center of gravity of the whole pallet and the upper barrel is located in the center of the pallet.