What are the problems needing attention in Tianjin plastic barrel storage

Three points should be paid attention to in the storage of plastic barrels in order to keep the storage time longer, the barrel body is not damaged and kept intact, especially for the storage requirements of plastic barrels loaded with goods.
Plastic barrels should be sheltered and stored to avoid exposure to sunlight. Storage temperature should be below 40 and above - 18 C. Plastic buckets stacked on pallets are packed and fixed with wrapping film. When packing, squeezing deformation between barrels and barrels should be avoided. After packing, the number of pallets stacked on pallets should be no more than two layers. When stacking, the upper and lower layers should be in line, so that the weight of the upper layers can be uniformly applied to the lower layers. The ground should be level and horizontal.
The drums packed with goods are stacked with double-sided flat pallets, the size of pallets is not more than 1.3 meters. Each tray can be stacked on a layer, the number of stacking buckets depends on the size of the tray, the edge of the bucket must not exceed the edge of the tray. The barrels on the pallet should be stacked symmetrically so that the center of gravity of the whole pallet and the upper barrel is located in the center of the pallet.
In short, as long as the plastic buckets are stored strictly in accordance with the requirements, the service life of the plastic buckets can be increased.